aquarihelp. back to aquaridash.
Browse help categories
Verified against aquaridash. on 2026-10-08

aquarivitals. help

aquarivitals. is where water test readings and water-change logs live. It tracks parameter history, shows trend lines, and surfaces the current state of your aquarium's water at a glance.

#Log a water test

The primary way to add a reading is through the +Log button — the persistent action button in the app interface. From there, choose Water test.

  1. Tap +Log.
  2. Choose Water test (or Water test & change if you are doing both at once).
  3. The reading modal opens. Set the Measured at date and time — this field is required.
  4. Enter values only for the parameters you actually tested. Leave the other fields blank.
  5. Add notes if useful.
  6. Tap Save reading.

> Note: There is no separate "+ Reading" button on the aquarivitals. page. The +Log → Water test path is the one correct entry point.

#Blank fields are not stored as zero

aquarivitals. does not record a blank field as 0. If you leave pH blank, the saved reading simply has no pH value — it will not appear in the pH trend line and will not pull the parameter's average toward zero.

This matters when your test kit only covers some parameters. A partial test is recorded faithfully and does not corrupt the trends for the parameters you skipped.

> Important: Even though the modal shows fields for pH, Ammonia, Nitrite, Nitrate, and Temperature, you only need to fill in the ones your test covers. aquaridash. will not graph an unmeasured parameter as zero.

#Log a water change

Water changes are logged separately from water tests, through the same +Log flow.

  1. Tap +Log.
  2. Choose Water change (or Water test & change if you are testing at the same time).
  3. Fill in the volume changed and unit.
  4. Optionally add the conditioner product you used.
  5. Set the date.
  6. Tap Save log.

#Cross-module reconciliation with aquaricare.

If you have a recurring water-change task scheduled in aquaricare., logging the water change here reconciles it automatically. aquaridash. matches the logged work to the open scheduled occurrence by aquarium, action type, and date. The scheduled task closes without you needing to separately mark it done in aquaricare.

> Tip: The reconciliation is a heuristic match. If the log's aquarium or date does not match a currently open occurrence, the scheduled task stays open. See aquaricare. → How matching works for the matching rules.

#Current-state strip

At the top of aquarivitals., a row of chips shows the latest recorded value for each parameter you have ever measured, along with a trend arrow (↑ rising, ↓ falling, → stable) based on the two most recent readings of that parameter.

A chip only appears for parameters that have at least one reading. If you have never recorded ammonia, there is no ammonia chip.

#Reading history

The history list below the chart shows all saved readings, sorted newest first. Each row shows:

  • the date in a compact date box;
  • a chip for each parameter that was recorded in that reading (parameters not measured in that reading are absent from the row);
  • the full timestamp and any notes;
  • Edit and Delete controls for that row.

> Note: The empty state reads "No water readings yet." until you save your first reading.

#Edit a reading

Tap Edit on any history row to re-open the reading modal pre-filled with that entry's values. Correct any field and tap Save reading. The existing reading is updated in place.

#Delete a reading

Tap Delete on a history row to remove that reading. aquaridash. asks for confirmation. Deleting a reading removes it from history and from the trend chart.

#Trend charts

The trend chart plots each recorded parameter as a separate colour-coded series over time. Only parameters with at least one finite value are plotted — a parameter you have never measured will not appear.

  • Readings with a blank field for a given parameter are skipped for that series. They do not create a zero data point.
  • The chart shows the full reading history by default. Use the time range selector (All data / Last 30 days / Last 7 days / Last 3 days) to zoom in.
  • Tap or click a data point circle to see the exact value and timestamp.
  • Use the series toggle buttons to show or hide individual parameters.
  • The same chart also appears on the dashboard in a compact form.

#Metrics

The metrics row above the chart shows the most recent recorded value for each parameter, along with the date of that reading. A "—" means no value has been recorded for that parameter yet.

  • Confirm the date range you are viewing. A sudden-looking change may reflect a gap in testing rather than a real shift.
  • Compare the same parameter across dates. Do not read across different parameters at the same time unless you understand the relationship (e.g. pH and KH interact; temperature and nitrate do not).
  • A blank reading for a parameter is not the same as a zero reading. If a row has no ammonia chip, that test did not include ammonia — not that ammonia was measured at 0 ppm.
  • Consider what else happened between readings: a water change, a new fish, a filter clean. The event overlay on the trend chart can show care-log events on the same timeline.

#If a water change did not clear its scheduled task

If you logged a water change and the matching aquaricare. task did not reconcile:

  1. Confirm the log was saved — open aquaricare. and check whether the task still shows as due.
  2. Check that the log's aquarium matches the task's aquarium.
  3. Check that the log's date falls within the open occurrence window.
  4. If the task is using Water test & change as its action type but the log was saved as Water change only (or vice versa), the types may not have matched.

See Troubleshooting → A task did not clear after I logged it for the full diagnostic flow.