aquarigear. — installed equipment
aquarigear. is where you record the hardware physically installed on your aquarium: the tank itself, filter, heater, light, pump, controller, and anything else that runs continuously as part of the setup.
> Note: aquarigear. and aquaristock. share the same parts list but show it from two different angles. aquarigear. shows installed hardware. aquaristock. shows consumables — food, water-care products, filter media, and other supplies you use up or keep in quantity. Adding a part in one place makes it available in both; the destination is determined by what the part is, not where you add it.
#Two destinations, one part list
The rule is straightforward:
- aquarigear. — installed, reusable hardware: tank, stand, filter, heater, light, pump, power strip, probes, sensors.
- aquaristock. — consumables you replenish: food, conditioner, fertilizer, test reagents, filter media, replacement cartridges, spare parts.
A canister filter is gear. The replacement foam pad you keep on the shelf is stock.
If you are not sure which section an item belongs to, check where it appears after you save it. aquaridash. classifies it automatically based on its type and any catalog link.
#Add installed equipment
- Open aquarigear.
- Tap + gear.
- In the Type field, confirm the type is correct — it defaults to Equipment for items added from aquarigear.
- Use the catalog search to find a matching product. Linking to the catalog unlocks maintenance schedules and compatible-parts suggestions. Type a brand, product name, or part number, then tap a result to select it.
- If your hardware is not in the catalog, skip the search and type a name directly.
- Optionally fill in the part number or SKU, on-hand quantity, reorder threshold, and a care note.
- Tap Save item.
The equipment appears as a card in the Installed hardware section.
> Tip: Linking to the catalog is optional, but recommended for any equipment with a known maintenance schedule — a canister filter, heater, or light. Without a catalog link, aquaridash. cannot suggest compatible replacement media or compute a next-service date.
#Equipment cards
Each piece of installed hardware shows as a card with:
- Name and type — the product name you entered or the catalog name.
- State — confirms the item is installed.
- Next service — when a catalog-linked item has a verified maintenance interval and a last-serviced date, the card shows how long until the next service (for example, "next service in 20 days", or "service due today"). The line turns coral when service is due. Equipment whose service date has passed is surfaced as overdue in the dashboard Next up section.
Tap Details on any card to open the edit form for that item.
#Maintenance schedules
When a catalog-linked piece of equipment has a manufacturer-verified maintenance interval, aquarigear. computes the next-service date from the last-serviced date you provide.
To set or update the last-serviced date:
- Tap Details on the equipment card.
- The edit form opens. The last-serviced date field appears for items with a known maintenance schedule.
- Set the date to the most recent time you serviced the equipment.
- Tap Save item.
Once a last-serviced date is set, aquarigear. shows the next-service estimate on the card. Items with an upcoming or overdue service also appear in the Next up section of the dashboard, sourced from aquarigear.
> Note: Maintenance intervals come from manufacturer documentation where available. The source is shown on the gear card's details. aquaridash. does not invent maintenance schedules — if no verified interval is available, the card shows 'no service schedule'.
See aquaricare. for completing maintenance tasks and logging when service was done.
#Compatible parts
When your installed equipment is linked to the catalog, aquarigear. checks whether the catalog lists compatible replacement media or parts for it. If any are found and not already in your inventory, they appear in the Compatible parts section.
Tap Add to inventory on a compatible part to add it directly to your stock in aquaristock.
#Replace or remove equipment
To remove a piece of hardware that is no longer installed:
- Tap Details on the equipment card.
- In the edit form, tap Remove (or use the Remove control).
- Confirm when prompted.
The entry is removed from aquarigear. for this aquarium. Transaction history associated with it is kept.
If you are swapping one model for another — replacing an old heater with a new one — remove the old entry and add the new one separately so the maintenance history and catalog link stay accurate.
#aquarigear. and aquaristock.
Consumable items — filter media, foam pads, biological supplements, replacement cartridges — belong in aquaristock., not aquarigear. aquaristock. tracks the quantity you have on hand, your reorder threshold, and consumption history.
If you add an item from aquarigear. and it turns up in aquaristock. instead, that is the correct behaviour: aquaridash. determined from the type or catalog link that it is a consumable.
See aquaristock. for managing quantities, receiving new stock, and setting reorder alerts.
#Related
- aquaristock. — consumables: food, water-care products, filter media, and supplies you replenish.
- aquaricare. — scheduled maintenance tasks, including equipment service logged against your gear.
- getting started — first-time setup: creating an aquarium, adding water parameters, and linking equipment.